13.1 Chemical Equilibria

A chemical reaction is usually written in a way that suggests it proceeds in one direction, the direction in which we read, but all chemical reactions are reversible, and both the forward and reverse reaction occur to one degree or another depending on conditions. In a chemical equilibrium, the forward and reverse reactions occur at equal rates, and the concentrations of products and reactants remain constant. If we run a reaction in a closed system so that the products cannot escape, we often find the reaction does not give a 100% yield of products. Instead, some reactants remain after the concentrations stop changing. At this point, when there is no further change in concentrations of reactants and products, we say the reaction is at equilibrium. A mixture of reactants and products is found at equilibrium.

For example, when we place a sample of dinitrogen tetroxide (N₂O₄, a colorless gas) in a glass tube, it forms nitrogen dioxide (NO₂, a brown gas) by the reaction

The color becomes darker as N₂O₄ is converted to NO₂. When the system reaches equilibrium, both N₂O₄ and NO₂ are present (Figure 1).

The formation of NO₂ from N₂O₄ is a reversible reaction, which is identified by the equilibrium arrow (⇌). All reactions are reversible, but many reactions, for all practical purposes, proceed in one direction until the reactants are exhausted and will reverse only under certain conditions. Such reactions are often depicted with a one-way arrow from reactants to products. Many other reactions, such as the formation of NO₂ from N₂O₄, are reversible under more easily obtainable conditions and, therefore, are named as such. In a reversible reaction, the reactants can combine to form products and the products can react to form the reactants. Thus, not only can N₂O₄ decompose to form NO₂, but the NO₂ produced can react to form N₂O₄. As soon as the forward reaction produces any NO₂, the reverse reaction begins and NO₂ starts to react to form N₂O₄. At equilibrium, the concentrations of N₂O₄ and NO₂ no longer change because the rate of formation of NO₂ is exactly equal to the rate of consumption of NO₂, and the rate of formation of N₂O₄ is exactly equal to the rate of consumption of N₂O₄. Chemical equilibrium is a dynamic process: As with the swimmers and the sunbathers, the numbers of each remain constant, yet there is a flux back and forth between them (Figure 2).

In a chemical equilibrium, the forward and reverse reactions do not stop, rather they continue to occur at the same rate, leading to constant concentrations of the reactants and the products. Plots showing how the reaction rates and concentrations change with respect to time are shown in Figure 1.

We can detect a state of equilibrium because the concentrations of reactants and products do not appear to change. However, it is important that we verify that the absence of change is due to equilibrium and not to a reaction rate that is so slow that changes in concentration are difficult to detect.

We use a double arrow when writing an equation for a reversible reaction. Such a reaction may or may not be at equilibrium. For example, Figure 1 shows the reaction:

When we wish to speak about one particular component of a reversible reaction, we use a single arrow. For example, in the equilibrium shown in Figure 1, the rate of the forward reaction

is equal to the rate of the backward reaction

Equilibrium and Soft Drinks

The connection between chemistry and carbonated soft drinks goes back to 1767, when Joseph Priestley (1733–1804; mostly known today for his role in the discovery and identification of oxygen) discovered a method of infusing water with carbon dioxide to make carbonated water. In 1772, Priestly published a paper entitled “Impregnating Water with Fixed Air.” The paper describes dripping oil of vitriol (today we call this sulfuric acid, but what a great way to describe sulfuric acid: “oil of vitriol” literally means “liquid nastiness”) onto chalk (calcium carbonate). The resulting CO₂ falls into the container of water beneath the vessel in which the initial reaction takes place; agitation helps the gaseous CO₂ mix into the liquid water.

[latex]\text{H}_2\text{SO}_4(l)\;+\;\text{CaCO}_3(s)\;{\longrightarrow}\;\text{CO}_2(g)\;+\;\text{H}_2\text{O}(l)\;+\;\text{CaSO}_4(aq)[/latex]

Carbon dioxide is slightly soluble in water. There is an equilibrium reaction that occurs as the carbon dioxide reacts with the water to form carbonic acid (H₂CO₃). Since carbonic acid is a weak acid, it can dissociate into protons (H⁺) and hydrogen carbonate ions [latex](\text{HCO}_3^{\;\;-})[/latex].

[latex]\text{CO}_2(aq)\;+\;\text{H}_2\text{O}(l)\;{\rightleftharpoons}\;\text{H}_2\text{CO}_3(aq)\;{\rightleftharpoons}\;\text{HCO}_3^{\;\;-}(aq)\;+\;\text{H}^{+}(aq)[/latex]

Today, CO₂ can be pressurized into soft drinks, establishing the equilibrium shown above. Once you open the beverage container, however, a cascade of equilibrium shifts occurs. First, the CO₂ gas in the air space on top of the bottle escapes, causing the equilibrium between gas-phase CO₂ and dissolved or aqueous CO₂ to shift, lowering the concentration of CO₂ in the soft drink. Less CO₂ dissolved in the liquid leads to carbonic acid decomposing to dissolved CO₂ and H₂O. The lowered carbonic acid concentration causes a shift of the final equilibrium. As long as the soft drink is in an open container, the CO₂ bubbles up out of the beverage, releasing the gas into the air (Figure 3). With the lid off the bottle, the CO₂ reactions are no longer at equilibrium and will continue until no more of the reactants remain. This results in a soft drink with a much lowered CO₂ concentration, often referred to as “flat.”

Let us consider the evaporation of bromine as a second example of a system at equilibrium.

An equilibrium can be established for a physical change—like this liquid to gas transition—as well as for a chemical reaction. Figure 4 shows a sample of liquid bromine at equilibrium with bromine vapor in a closed container. When we pour liquid bromine into an empty bottle in which there is no bromine vapor, some liquid evaporates, the amount of liquid decreases, and the amount of vapor increases. If we cap the bottle so no vapor escapes, the amount of liquid and vapor will eventually stop changing and an equilibrium between the liquid and the vapor will be established. If the bottle were not capped, the bromine vapor would escape and no equilibrium would be reached.