Private: Chapter Three

Molecular and Ionic Compounds (3.7)

By the end of this section, you will be able to:

  • Define ionic and molecular (covalent) compounds
  • Predict the type of compound formed from elements based on their location within the periodic table
  • Determine formulas for simple ionic compounds

In ordinary chemical reactions, the nucleus of each atom (and thus the identity of the element) remains unchanged. Electrons, however, can be added to atoms by transfer from other atoms, lost by transfer to other atoms, or shared with other atoms. The transfer and sharing of electrons among atoms govern the chemistry of the elements. During the formation of some compounds, atoms gain or lose electrons, and form electrically charged particles called ions (Figure 3.48).

Figure A shows a sodium atom, N a, which has a nucleus containing 11 protons and 12 neutrons. The atom’s surrounding electron cloud contains 11 electrons. Figure B shows a sodium ion, N a superscript plus sign. Its nucleus contains 11 protons and 12 neutrons. The ion’s electron cloud contains 10 electrons and is smaller than that of the sodium atom in figure A.
Figure 3.48 (a) A sodium atom (Na) has equal numbers of protons and electrons (11) and is uncharged. (b) A sodium cation (Na+) has lost an electron, so it has one more proton (11) than electrons (10), giving it an overall positive charge, signified by a superscripted plus sign. By: Rice University Openstax CC BY NC SA

You can use the periodic table to predict whether an atom will form an anion or a cation, and you can often predict the charge of the resulting ion. Atoms of many main-group metals lose enough electrons to leave them with the same number of electrons as an atom of the preceding noble gas. To illustrate, an atom of an alkali metal (group 1) loses one electron and forms a cation with a 1+ charge; an alkaline earth metal (group 2) loses two electrons and forms a cation with a 2+ charge, and so on. For example, a neutral calcium atom, with 20 protons and 20 electrons, readily loses two electrons. This results in a cation with 20 protons, 18 electrons, and a 2+ charge. It has the same number of electrons as atoms of the preceding noble gas, argon, and is symbolized Ca2+. The name of a metal ion is the same as the name of the metal atom from which it forms, so Ca2+ is called a calcium ion.

When atoms of nonmetal elements form ions, they generally gain enough electrons to give them the same number of electrons as an atom of the next noble gas in the periodic table. Atoms of group 17 gain one electron and form anions with a 1− charge; atoms of group 16 gain two electrons and form ions with a 2− charge, and so on. For example, the neutral bromine atom, with 35 protons and 35 electrons, can gain one electron to provide it with 36 electrons. This results in an anion with 35 protons, 36 electrons, and a 1− charge. It has the same number of electrons as atoms of the next noble gas, krypton, and is symbolized Br. (A discussion of the theory supporting the favored status of noble gas electron numbers reflected in these predictive rules for ion formation is provided in a later chapter of this text.)

Note the usefulness of the periodic table in predicting likely ion formation and charge (Figure 3.49). Moving from the far left to the right on the periodic table, main-group elements tend to form cations with a charge equal to the group number. That is, group 1 elements form 1+ ions; group 2 elements form 2+ ions, and so on. Moving from the far right to the left on the periodic table, elements often form anions with a negative charge equal to the number of groups moved left from the noble gases. For example, group 17 elements (one group left of the noble gases) form 1− ions; group 16 elements (two groups left) form 2− ions, and so on. This trend can be used as a guide in many cases, but its predictive value decreases when moving toward the center of the periodic table. In fact, transition metals and some other metals often exhibit variable charges that are not predictable by their location in the table. For example, copper can form ions with a 1+ or 2+ charge, and iron can form ions with a 2+ or 3+ charge.

Group one of the periodic table contains L i superscript plus sign in period 2, N a superscript plus sign in period 3, K superscript plus sign in period 4, R b superscript plus sign in period 5, C s superscript plus sign in period 6, and F r superscript plus sign in period 7. Group two contains B e superscript 2 plus sign in period 2, M g superscript 2 plus sign in period 3, C a superscript 2 plus sign in period 4, S r superscript 2 plus sign in period 5, B a superscript 2 plus sign in period 6, and R a superscript 2 plus sign in period 7. Group six contains C r superscript 3 plus sign and C r superscript 6 plus sign in period 4. Group seven contains M n superscript 2 plus sign in period 4. Group eight contains F e superscript 2 plus sign and F e superscript 3 plus sign in period 4. Group nine contains C o superscript 2 plus sign in period 4. Group ten contains N i superscript 2 plus sign in period 4, and P t superscript 2 plus sign in period 6. Group 11 contains C U superscript plus sign and C U superscript 2 plus sign in period 4, A g superscript plus sign in period 5, and A u superscript plus sign and A u superscript 3 plus sign in period 6. Group 12 contains Z n superscript 2 plus sign in period 4, C d superscript 2 plus sign in period 5, and H g subscript 2 superscript 2 plus sign and H g superscript 2 plus sign in period 6. Group 13 contains A l superscript 3 plus sign in period 3. Group 14 contains C superscript 4 negative sign in period 2. Group 15 contains N superscript 3 negative sign in period 2, P superscript 3 negative sign in period 3, and A s superscript 3 negative sign in period 4. Group 16 contains O superscript 2 negative sign in period 2, S superscript 2 negative sign in period 3, S e superscript 2 negative sign in period 4 and T e superscript 2 negative sign in period 5. Group 17 contains F superscript negative sign in period 2, C l superscript negative sign in period 3, B r superscript negative sign in period 4, I superscript negative sign in period 5, and A t superscript negative sign in period 6. Group 18 contains H e in period 1, N e in period 2, A r in period 3, K r in period 4, X e in period 5 and R n in period 6.
Figure 3.49 Some elements exhibit a regular pattern of ionic charge when they form ions. By: Rice University Openstax CC BY NC SA

EXAMPLE 3.15

Composition of IonsAn ion found in some compounds used as antiperspirants contains 13 protons and 10 electrons. What is its symbol?

SolutionBecause the number of protons remains unchanged when an atom forms an ion, the atomic number of the element must be 13. Knowing this lets us use the periodic table to identify the element as Al (aluminum). The Al atom has lost three electrons and thus has three more positive charges (13) than it has electrons (10). This is the aluminum cation, Al3+.

Check Your LearningGive the symbol and name for the ion with 34 protons and 36 electrons.

ANSWER:

Se2−, the selenide ion

EXAMPLE 3.16

Formation of IonsMagnesium and nitrogen react to form an ionic compound. Predict which forms an anion, which forms a cation, and the charges of each ion. Write the symbol for each ion and name them.

SolutionMagnesium’s position in the periodic table (group 2) tells us that it is a metal. Metals form positive ions (cations). A magnesium atom must lose two electrons to have the same number electrons as an atom of the previous noble gas, neon. Thus, a magnesium atom will form a cation with two fewer electrons than protons and a charge of 2+. The symbol for the ion is Mg2+, and it is called a magnesium ion.

Nitrogen’s position in the periodic table (group 15) reveals that it is a nonmetal. Nonmetals form negative ions (anions). A nitrogen atom must gain three electrons to have the same number of electrons as an atom of the following noble gas, neon. Thus, a nitrogen atom will form an anion with three more electrons than protons and a charge of 3−. The symbol for the ion is N3−, and it is called a nitride ion.

Check Your LearningAluminum and carbon react to form an ionic compound. Predict which forms an anion, which forms a cation, and the charges of each ion. Write the symbol for each ion and name them.

ANSWER:

Al will form a cation with a charge of 3+: Al3+, an aluminum ion. Carbon will form an anion with a charge of 4−: C4−, a carbide ion.

The ions that we have discussed so far are called monatomic ions, that is, they are ions formed from only one atom. We also find many polyatomic ions. These ions, which act as discrete units, are electrically charged molecules (a group of bonded atoms with an overall charge). Some of the more important polyatomic ions are listed in Table 3.6Oxyanions are polyatomic ions that contain one or more oxygen atoms. At this point in your study of chemistry, you should memorize the names, formulas, and charges of the most common polyatomic ions. Because you will use them repeatedly, they will soon become familiar.

 

Table 3.6 Common Polyatomic Ions By: Rice University OpenStax CC BY-NC-SA 4.0

Name

Formula

Related Acid

Formula

ammonium

NH4 +

hydronium

H3O+

peroxide

O2 2-

hydroxide

OH-

acetate

CH3 COO−

acetic acid

CH3COOH

cyanide

CN

hydrocyanic acid

HCN

azide

N3

hydrazoic acid

HN3

carbonate

CO3 2-

carbonic acid

H2CO3

bicarbonate

HCO3 –

nitrate

NO3 −

nitric acid

HNO3

nitrite

NO2 −

nitrous acid

HNO2

sulfate

SO4 2−

sulfiric acid

H2SO4

hydrogen sulfate

HSO4 −

sulfite

SO3 2−

sulfurous acid

H2SO3

hydrogen sulfite

HSO3 −

phosphate

PO4 3−

phosphoric acid

H3PO4

hydrogen phosphate

HPO4 2−

dihydrogen phosphate

H2 PO4 −

perchlorate

ClO4 −

perchloric acid

HClO4

chlorate

ClO3 −

chloric acid

HClO3

chlorite

ClO2 −

chlorous acid

HClO2

hypochlorite

ClO−

hypochlorous acid

HClO

chromate

CrO4 2−

chromic acid

H2Cr2O4

dichromate

Cr2 O7 2−

dichromic acid

H2Cr2O7

permanganate

MnO4 −

permanganic acid

HMnO4

Note that there is a system for naming some polyatomic ions; -ate and -ite are suffixes designating polyatomic ions containing more or fewer oxygen atoms. Per- (short for “hyper”) and hypo- (meaning “under”) are prefixes meaning more oxygen atoms than -ate and fewer oxygen atoms than -ite, respectively. For example, perchlorate is ClO4,

ClO4,

 chlorate is ClO3,

ClO3,

 chlorite is ClO2

ClO2

 and hypochlorite is ClO. Unfortunately, the number of oxygen atoms corresponding to a given suffix or prefix is not consistent; for example, nitrate is NO3

NO3

 while sulfate is SO42−.

SO42−.

 This will be covered in more detail later in the module on nomenclature.

The nature of the attractive forces that hold atoms or ions together within a compound is the basis for classifying chemical bonding. When electrons are transferred and ions form, ionic bonds result. Ionic bonds are electrostatic forces of attraction, that is, the attractive forces experienced between objects of opposite electrical charge (in this case, cations and anions). When electrons are “shared” and molecules form, covalent bonds result. Covalent bonds are the attractive forces between the positively charged nuclei of the bonded atoms and one or more pairs of electrons that are located between the atoms. Compounds are classified as ionic or molecular (covalent) on the basis of the bonds present in them.

Ionic Compounds

When an element composed of atoms that readily lose electrons (a metal) reacts with an element composed of atoms that readily gain electrons (a nonmetal), a transfer of electrons usually occurs, producing ions. The compound formed by this transfer is stabilized by the electrostatic attractions (ionic bonds) between the ions of opposite charge present in the compound. For example, when each sodium atom in a sample of sodium metal (group 1) gives up one electron to form a sodium cation, Na+, and each chlorine atom in a sample of chlorine gas (group 17) accepts one electron to form a chloride anion, Cl, the resulting compound, NaCl, is composed of sodium ions and chloride ions in the ratio of one Na+ ion for each Cl ion. Similarly, each calcium atom (group 2) can give up two electrons and transfer one to each of two chlorine atoms to form CaCl2, which is composed of Ca2+ and Cl ions in the ratio of one Ca2+ ion to two Cl ions.

A compound that contains ions and is held together by ionic bonds is called an ionic compound. The periodic table can help us recognize many of the compounds that are ionic: When a metal is combined with one or more nonmetals, the compound is usually ionic. This guideline works well for predicting ionic compound formation for most of the compounds typically encountered in an introductory chemistry course. However, it is not always true (for example, aluminum chloride, AlCl3, is not ionic).

You can often recognize ionic compounds because of their properties. Ionic compounds are solids that typically melt at high temperatures and boil at even higher temperatures. For example, sodium chloride melts at 801 °C and boils at 1413 °C. (As a comparison, the molecular compound water melts at 0 °C and boils at 100 °C.) In solid form, an ionic compound is not electrically conductive because its ions are unable to flow (“electricity” is the flow of charged particles). When molten, however, it can conduct electricity because its ions are able to move freely through the liquid (Figure 3.50).

This figure shows three photos connected by right-facing arrows. The first shows a light bulb as part of a complex lab equipment setup. The light bulb is not lit. The second photo shows a substances being heated or set on fire. The third shows the light bulb again which is lit.
Figure 3.50 Sodium chloride melts at 801 °C and conducts electricity when molten. By: Rice University Openstax CC BY NC SA

 

Link to Learning

Watch this video to see a mixture of salts melt and conductelectricity.

 

In every ionic compound, the total number of positive charges of the cations equals the total number of negative charges of the anions. Thus, ionic compounds are electrically neutral overall, even though they contain positive and negative ions. We can use this observation to help us write the formula of an ionic compound. The formula of an ionic compound must have a ratio of ions such that the numbers of positive and negative charges are equal.

EXAMPLE 3.17

Predicting the Formula of an Ionic CompoundThe gemstone sapphire (Figure 3.51) is mostly a compound of aluminum and oxygen that contains aluminum cations, Al3+, and oxygen anions, O2−. What is the formula of this compound?

This is a photograph of a ring with a sapphire set in it.
Figure 3.51 Although pure aluminum oxide is colorless, trace amounts of iron and titanium give blue sapphire its characteristic color. By: Rice University Openstax CC BY NC SA

SolutionBecause the ionic compound must be electrically neutral, it must have the same number of positive and negative charges. Two aluminum ions, each with a charge of 3+, would give us six positive charges, and three oxide ions, each with a charge of 2−, would give us six negative charges. The formula would be Al2O3.

Check Your LearningPredict the formula of the ionic compound formed between the sodium cation, Na+, and the sulfide anion, S2−.

ANSWER:

Na2S

Many ionic compounds contain polyatomic ions (Table 3.6) as the cation, the anion, or both. As with simple ionic compounds, these compounds must also be electrically neutral, so their formulas can be predicted by treating the polyatomic ions as discrete units. We use parentheses in a formula to indicate a group of atoms that behave as a unit. For example, the formula for calcium phosphate, one of the minerals in our bones, is Ca3(PO4)2. This formula indicates that there are three calcium ions (Ca2+) for every two phosphate (PO43−)

(PO43−)

 groups. The PO43−

PO43−

 groups are discrete units, each consisting of one phosphorus atom and four oxygen atoms, and having an overall charge of 3−. The compound is electrically neutral, and its formula shows a total count of three Ca, two P, and eight O atoms.

EXAMPLE 3.18

Predicting the Formula of a Compound with a Polyatomic AnionBaking powder contains calcium dihydrogen phosphate, an ionic compound composed of the ions Ca2+ and H2PO4.

H2PO4. What is the formula of this compound?

SolutionThe positive and negative charges must balance, and this ionic compound must be electrically neutral. Thus, we must have two negative charges to balance the 2+ charge of the calcium ion. This requires a ratio of one Ca2+ ion to two H2PO4

H2PO4 ions. We designate this by enclosing the formula for the dihydrogen phosphate ion in parentheses and adding a subscript 2. The formula is Ca(H2PO4)2.

Check Your LearningPredict the formula of the ionic compound formed between the lithium ion and the peroxide ion, O22−

O22− (Hint: Use the periodic table to predict the sign and the charge on the lithium ion.)

ANSWER:

Li2O2

Because an ionic compound is not made up of single, discrete molecules, it may not be properly symbolized using a molecular formula. Instead, ionic compounds must be symbolized by a formula indicating the relative numbers of its constituent ions. For compounds containing only monatomic ions (such as NaCl) and for many compounds containing polyatomic ions (such as CaSO4), these formulas are just the empirical formulas introduced earlier. However, the formulas for some ionic compounds containing polyatomic ions are not empirical formulas. For example, the ionic compound sodium oxalate is comprised of Na+ and C2O42−

C2O42−

 ions combined in a 2:1 ratio, and its formula is written as Na2C2O4. The subscripts in this formula are not the smallest-possible whole numbers, as each can be divided by 2 to yield the empirical formula, NaCO2. This is not the accepted formula for sodium oxalate, however, as it does not accurately represent the compound’s polyatomic anion, C2O42−.

C2O42−.

 

Molecular Compounds

Many compounds do not contain ions but instead consist solely of discrete, neutral molecules. These molecular compounds (covalent compounds) result when atoms share, rather than transfer (gain or lose), electrons. Covalent bonding is an important and extensive concept in chemistry, and it will be treated in considerable detail in a later chapter of this text. We can often identify molecular compounds on the basis of their physical properties. Under normal conditions, molecular compounds often exist as gases, low-boiling liquids, and low-melting solids, although many important exceptions exist.

Whereas ionic compounds are usually formed when a metal and a nonmetal combine, covalent compounds are usually formed by a combination of nonmetals. Thus, the periodic table can help us recognize many of the compounds that are covalent. While we can use the positions of a compound’s elements in the periodic table to predict whether it is ionic or covalent at this point in our study of chemistry, you should be aware that this is a very simplistic approach that does not account for a number of interesting exceptions. Shades of gray exist between ionic and molecular compounds, and you’ll learn more about those later.

EXAMPLE 3.19

Predicting the Type of Bonding in CompoundsPredict whether the following compounds are ionic or molecular:

(a) KI, the compound used as a source of iodine in table salt

(b) H2O2, the bleach and disinfectant hydrogen peroxide

(c) CHCl3, the anesthetic chloroform

(d) Li2CO3, a source of lithium in antidepressants

Solution(a) Potassium (group 1) is a metal, and iodine (group 17) is a nonmetal; KI is predicted to be ionic.

(b) Hydrogen (group 1) is a nonmetal, and oxygen (group 16) is a nonmetal; H2O2 is predicted to be molecular.

(c) Carbon (group 14) is a nonmetal, hydrogen (group 1) is a nonmetal, and chlorine (group 17) is a nonmetal; CHCl3 is predicted to be molecular.

(d) Lithium (group 1) is a metal, and carbonate is a polyatomic ion; Li2CO3 is predicted to be ionic.

Check Your LearningUsing the periodic table, predict whether the following compounds are ionic or covalent:

(a) SO2

(b) CaF2

(c) N2H4

(d) Al2(SO4)3

ANSWER:

(a) molecular; (b) ionic; (c) molecular; (d) ionic

License

Icon for the Creative Commons Attribution 4.0 International License

Chemistry 110 Copyright © by OpenStax is licensed under a Creative Commons Attribution 4.0 International License, except where otherwise noted.

Share This Book